kangsuper

Selasa, 25 Juli 2017

Flash Polytron R2507 White / Dark Gold ZT

 POLYTRON R2507 V5.2.6 20161217
Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2507_V5.2.6_20161217
Model Ext   : POLYTRON R2507

Bahan :

1. Download Firmware PAC Polytron R2507 White Gold ZT V5.2.6 20161217 atau Download Disini
 
2. Download Firmware PAC Polytron R2507 Dark Gold ZT V5.2.7 20161223 atau Download Disini



3. Download SPD_Upgrade_Tool_R4.0.0001  Download Disini
4.  Driver SPD by InfinityBox
5. Tutorial Flash via research here
6. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Firmware Pac Polytron R2507 versi lain :

Error pada research download baca disini

Cara Flash R2507 via SPD UPGRADE TOOL



Log read Firmware Polytron R2507 White Gold ZT
Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
 ====  Wait for phone...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2507_V5.2.6_20161217
Model Ext   : POLYTRON R2507
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2229 MiB
Saved to : E:\polytron\New folder\SP7731GEA_HDR_device_5.1_POLYTRON_R2507_V5.2.6_20161217_POLYTRON_R2507\
Done!

Elapsed: 00:14:57


Minggu, 16 Juli 2017

Flash & Firmware MIVO MV480

Brand     : MIVO
ProdName  : MV480
ProdModel : MV480
Device    : d958
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

Bahan :
  1.  Download Firmware Mivo MV480 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Flash Mivo MV480 via Flash Tool



Log Read Firmware Mivo MV480
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034473930102090D417209F
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 110100303034473930102090D417209F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 44A94748FB0C9650F4D015B6CCD552EB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : MIVO
ProdName  : MV480
ProdModel : MV480
Device    : d958
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

[Read Ok] : preloader_d958.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / d958 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 955 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6572__MIVO__MV480__d958__4.4.2__ALPS.KK1.MP6.V1\

All done!



Flash & Firmware Fortis Apollo 5 MT6582

Fortis Apollo 5
Brand     : MS930
ProdName  : MS930
ProdModel : Apollo 5
Device    : MS930
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

Bahan :
  1.  Download Firmware Fortis Apollo 5 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Flash Fortis Apollo 5 via Flash Tool


Log Read Firmware Fortis Apollo 5
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384731650507455A24643297
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507455A24643297
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD8016F65058FC6280D7076358
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : MS930
ProdName  : MS930
ProdModel : Apollo 5
Device    : MS930
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_sm619b_w_jdf_ms930_evercoss_82.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / sm619b_w_jdf_ms930_evercoss_82 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 951 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6582__MS930__Apollo_5__MS930__4.4.2__ALPS.KK1.MP1.V2.10\

All done!



Flash & Remove FRP Aldo AS 10

Aldo AS-10 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : ALDO
ProdName  : ALDO
ProdModel : ALDO
Device    : ALDO
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42
ALDO_P0_6_20160218

 Bahan :

  1.  Download Full firmware + FRP Aldo AS10 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Firmware ALDO  AS 10  4.4 KitKat Download disini

Cara Kerja :
Buat remove verifikasi akun google Aldo AS-10 tinggal , hanya centang pada tab FRP saja seperti video dibawah video 1


Cara Flash & remove FRP verifikasi akun google Aldo AS 10 via flash tool
-Only Remove FRPAldo AS 10
-Flash & Remove FRP Aldo AS 10



 Log Read Firmware Aldo As 10
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505072AFA854EC229
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505072AFA854EC229
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : E095483D82CCF4455958850AB9DA6E4F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : ALDO
ProdName  : ALDO
ProdModel : ALDO
Device    : ALDO
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42

[Read Ok] : preloader_b905_huaxing.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b905_huaxing / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1381 MiB
Scatter saved to : E:\andro 1\aldo\as10\MT6580__ALDO__ALDO__ALDO__5.1__ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42\

All done!



Rabu, 05 Juli 2017

Flash & Firmware PAC Mito A69


Model Name  : s7358_qhd_lmplus_dt_Multi
Model Brand : MITO_A69
Model Device: scx35_s7358_qhd_lm
AndrVersion : 5.1
BaseBand CPU: S7358_QHD_LM
Project Ver : MITO_A69_07-09-2016_V10
Model Ext   : MITO_A69

Bahan:
1. Download Firmware PAC Mito A69 v10 atau Download disini

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash  Mito A69 via Research Download



Log Read Firmware Mito A69
Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : s7358_qhd_lmplus_dt_Multi
Model Brand : MITO_A69
Model Device: scx35_s7358_qhd_lm
AndrVersion : 5.1
BaseBand CPU: S7358_QHD_LM
Project Ver : MITO_A69_07-09-2016_V10
Model Ext   : MITO_A69
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
Skip [EMP] : FBOOTLOGO
Skip [EMP] : FBOOTLOGO3
Skip [EMP] : FBOOTLOGO4
Skip [EMP] : FBOOTLOGO5
Skip [EMP] : FBOOTLOGO6
Skip [EMP] : FBOOTLOGO7
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1331 MiB
Saved to : E:\andro 1\mito\mito a69\New folder\S7358_QHD_LM_scx35_s7358_qhd_lm_5.1_MITO_A69_07-09-2016_V10_MITO_A69\
Done!




Flash & Remove FRP Polytron L501 WHITE / BLACK TESTED


Polytron L 501 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : POLYTRON_L501
ProdName  : POLYTRON_L501
ProdModel : POLYTRON_L501
Device    : Android
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L

TESTED BUAT :
-Polytron L501 WHITE
-Polytron L501 BLACK

 Bahan :
  1.  Download Firmware Polytron L501 FRP only v02 atau Download Disini
  2.  Download Full firmware + FRP Polytron L501 v02 atau Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Versi Lain Polytron L501 :

Cara Kerja :
1. Buat remove verifikasi akun google Polytron L501 tinggal pake file FRP only (file ke 1), hanya centang pada tab FRP saja seperti video dibawah
2.  Kalau mau full flash Polytron L501 pake file yang ke 2
3. FULL FLASH WAJIB CENTANG DA DL ALL with Checksum pada Flash tool, . Setting : Flashtool=>option=>Download=>centang

Cara Flash & remove FRP verifikasi akun google Polytron L501 via flash tool



 Log Read Firmware Polytron L 501
 Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065314738E93407055B986106
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A4838473165050734E90661735B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : DA90FBBBA64FE7083A7661193F696B75
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : POLYTRON_L501
ProdName  : POLYTRON_L501
ProdModel : POLYTRON_L501
Device    : Android
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L

[Read Ok] : preloader_bird6735m_35gu_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / bird6735m_35gu_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1661 MiB
Scatter saved to : E:\andro 1\polytron\L 501\MT6735__POLYTRON_L501__POLYTRON_L501__Android__5.1__ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L\

All done!



Flash & Firmware Brandcode B29

Brandcode B29
Brand     : kimfly
ProdName  : B29
ProdModel : B29
Device    : kimfly
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

Bahan :
  1.  Download Firmware Brandcode B29 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Flash Brancode B29 via Flash Tool



Log Read Firmware Brandcode B29
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 009800BC009000660076001600080000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID    : 5FD5016174E9B287C1225491E5932EF0
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_yuanda72_cwet_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_lca / NAND
FW Size : 316 MiB

Brand     : kimfly
ProdName  : B29
ProdModel : B29
Device    : kimfly
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

Android Info saved

Scatter saved to : E:\andro 1\brandcode\b29\MT6572_NAND_kimfly__B29__kimfly__4.4.2__ALPS.KK1.MP7.V1

Done!