kangsuper

Minggu, 30 April 2017

Flash Lava Iris 758 4G BI / Bahasa Indonesia

Brand     : Lava
ProdName  : iris 758 4G
ProdModel : iris 758 4G
Device    : lava35m_sp461
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_LAVA6735.64.L1_P23

Bahan :
  1.  Download Firmware  Lava Iris 758 4G atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Flash  Lava Iris 758 4G via Flash Tool



Log Read Firmware  Lava Iris 758 4G
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D32323734BA00422B1145C4
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D4200BA34C445732B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 3E381E6259E3F1091B7B03D2E68CC391
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Lava
ProdName  : iris 758 4G
ProdModel : iris 758 4G
Device    : lava35m_sp461
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_LAVA6735.64.L1_P23

[Read Ok] : preloader_lava35m_sp461.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / lava35m_sp461 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2051 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6735__Lava__iris_758_4G__lava35m_sp461__5.1__ALPS.L1.MP3.V2_LAVA6735.64.L1_P23\


Flash Strawberry S8 SP7731


Strawberry S8
Model Name  : H100
Model Brand : S8
Model Device: H100
AndrVersion : 5.0.1
BaseBand CPU: H100
Project Ver : H100 14B_test-keys
Model Ext   : S8

Bahan:
1. Download Firmware PAC Strawberry S8 atau Download disini

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash  Strawberry S8 via Research Download


Log Read Firmware  Strawberry S8
Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : H100
Model Brand : S8
Model Device: H100
AndrVersion : 5.0.1
BaseBand CPU: H100
Project Ver : H100 14B_test-keys
Model Ext   : S8
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 772 MiB
Saved to : E:\andro 1\strawberry\s8\H100_H100_5.0.1_H100_14B_test-keys_S8\
Done!



Sabtu, 22 April 2017

Cara Flash Oppo F1fw via Mode HS-USB QDLoader 9008

Brand     : OPPO
ProdName  : F1f
ProdModel : F1f
Device    : F1f
AndroidVer: 5.1.1
Manufact. : OPPO
QLMxCPU   : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__F1f__F1f__F1f

Tool Flash wajib mengunakan CM2 atau Unitool/volcano

Bahan :
1. Download Firmware Oppo F1fw atau Download Disini
2. Tool wajib CM2 atau Unitool/volcano
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Oppo F1fw via CM2


Log Read Flash Oppo F1fw
Operation : Read Flash [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 06DCC71C
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : A95B31CD68F6E3EED98E464F88D3636B
ID_BLOCK_L : B7CE70DBDC47F77C915C31EEE40B2526
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand     : OPPO
ProdName  : F1f
ProdModel : F1f
Device    : F1f
AndroidVer: 5.1.1
Manufact. : OPPO
QLMxCPU   : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__F1f__F1f__F1f

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : pnvbak.img
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : driver.iso
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 3094 MiB

Done!
Elapsed: 00:05:09


Cara Flash Mito A95

Brand     : Device
ProdName  : lcsh89_we_jb2
ProdModel : MITO A95
Device    : lcsh89_we_jb2
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.MP.V1.2

Bahan :
  1.  Download Firmware Mito A95 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Flash Mito A95 via Flash Tool



 Log Read Firmware Mito A95
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x86
NAND Flash : NOT INSTALLED
eMMC Flash : 204A0190594E49586FA116485B70E7AF
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A16FAFE7705B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 51EF2AA2C210EDC29281252926B814FE
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Device
ProdName  : lcsh89_we_jb2
ProdModel : MITO A95
Device    : lcsh89_we_jb2
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.MP.V1.2

[Read Ok] : preloader_lcsh89_we_jb2.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / lcsh89_we_jb2 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 803 MiB
Scatter saved to : E:\andro 1\mito\mito a95\MT6589__Device__MITO_A95__lcsh89_we_jb2__4.2.1__ALPS.JB2.MP.V1.2\

All done!



Flash Redmi Note 4 2016050 / 2016051

REDMI NOTE 4 MTK 2016050
CHIP     : MT6797
CPU ID   :
EMMC ID  : 150100424A4E42345207C8C348AF93F1
EMMC Size: 32GB,  usable capacity: 29.13GB
EMMC Name: eMMC_Samsung_BJNB4R

Micloud  Redmi Note 4 ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx


Bahan :
  1. Download Firmware REDMI NOTE 4 MTK 2016050 / 2016051 atau Download Disini
  2.  Download SP_Flash_Tool_v5.1620_Win DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
 Note 4 mtk versi lain  :
  BOOT VOLUME DOWN / VOL -Note :
1. Hanya pake Flash tool SP_Flash_Tool_v5.1620_Win
2. Buat micloud, silahkan pilih file ke1


Cara Flash REDMI NOTE 4 MTK 2016050 via Flash Tool


Log Read Flash Redmi Note 4 2016050
 Action : Read Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM4 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 0279
 CPU_SW: 0000
 CPU_HW: CA01
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:brom
 Init DRAM...OK
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x200000] size[0x40000]
 DRAM: type[0x1] base_address[0x40000000] size[0xC0000000]
 Getting H/W info ...
 CHIP     : MT6797
 CPU ID   :
 EMMC ID  : 150100424A4E42345207C8C348AF93F1
 EMMC Size: 32GB,  usable capacity: 29.13GB
 EMMC Name: eMMC_Samsung_BJNB4R

 USB STATUS: full-speed

 usb switching to high speed ...
 New Port: COM5   ......ok

 Reading Project Property ...
 done.
 Making dir: E:\andro 1\xiaomi\REDMI NOTE 4 MTK 2016050\MT6797_Xiaomi_Redmi Note 4_Android6.0_MRA58K_20170421_
035720\...[ok]
 Reading preloader ......ok
 Reading recovery ......ok
 Reading md1img ......ok
 Reading md1dsp ......ok
 Reading md1arm7 ......ok
 Reading md3img ......ok
 Reading scp1 ......ok
 Reading scp2 ......ok
 Reading nvram ......ok
 Reading lk ......ok
 Reading lk2 ......ok
 Reading boot ......ok
 Reading logo ......ok
 Reading tee1 ......ok
 Reading tee2 ......ok
 Reading cust ......ok
 Reading system ......ok
 Reading cache ......ok
 Reading userdata ......ok
 All done.
 Files saved to: E:\andro 1\xiaomi\REDMI NOTE 4 MTK 2016050\MT6797_Xiaomi_Redmi Note 4_Android6.0_MRA58K_20170421
_035720\

 Action completed
 Time taken : 00:06:31
 Reconnect Battery/USB Cable


Kamis, 13 April 2017

Flash Advan S50D Build Number : WG5016/C12_J_V4.0B/KitKat4.4

Model Name  : revo_6408
Model Brand : ADVAN
Model Device: S50D
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_HD
Project Ver : WG5016_ADVANS50D_V03_20151105
Model Ext   : S50D

Bahan :
1. Download Firmware PAC S50D V03 Build Number : WG5016/C12_J_V4.0B/KitKat4.4
2. Download Firmware PAC S50D V01 dan V04
3. Buat yang abis di flash ADVAN S50D Blank putih, pake S50D V05
4. Download Research Download R2.10
5. Driver SPD by InfinityBox
6. Turorial Flash via research here
7. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Advan S50D via Research Download


Log Read Firmware Advan S50D
[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : revo_6408
Model Brand : ADVAN
Model Device: S50D
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_HD
Project Ver : WG5016_ADVANS50D_V03_20151105
Model Ext   : S50D

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 890 MiB
Saved to : E:\andro 1\advan\s50d v3\SP7731GEA_HD_S50D_4.4.2_WG5016_ADVANS50D_V03_20151105_S50D\
Done!

Flash Advan S5x+ Build Number : NW550A/A25_V3 0/KitKat4.4

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : S5X+
Device    : Vandroid
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10


Bahan :
  1.  Download Firmware Advan S5x+ NW550A/A25_V3 0/KitKat4.4 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Flash Advan S5x+ via Flash Tool



Log Read Flash Advan S5X+
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847326404050DA147A3817B
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A483847326404050DA147A3817B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : EC1B8425B596293321B739ACA116E043
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : S5X+
Device    : Vandroid
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_vanzo82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / vanzo82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1204 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6582__ADVAN__S5X+__Vandroid__4.4.2__ALPS.KK1.MP1.V2.10\

All done!




Flash G-Touch KingT 07

 G-Touch KingT 07
ProdName  : kt07_3g_detong0919
ProdModel :  KingT_07
Device    : kt07_3g_detong0919
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.10

Bahan :
  1.  Download Firmware Tablet G-Touch KingT 07 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Flash Tablet G-Touch KingT 07 via Flash Tool


Log read Flash G-Touch KingT 07
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A2058494E5948120052852A5F0D
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E5948120052852A5F0D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 17186C2C825E034297122FDBA8FEE3B8
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

ProdName  : kt07_3g_detong0919
ProdModel :  KingT_07
Device    : kt07_3g_detong0919
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.10

[Read Ok] : preloader_kt07_3g_detong0919.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / kt07_3g_detong0919 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 681 MiB
Scatter saved to : E:\andro 1\G TOUCH\KING T07\MT6572____KingT_07__kt07_3g_detong0919__4.2.2__ALPS.JB3.MP.V1.10\

All done!



Cara Flash GUO PHONE V12 Lolipop


Guophone Model : V12
Brand     : Z5
ProdName  : Z5
ProdModel : Z5
Device    : Z5
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

Bahan :
  1.  Download Firmware Guophone V12 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Flash Tablet Guo Phone V12 via Flash Tool




 Log Read Firmware Guophone V12
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110142C25C3E6355
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110142C25C3E6355
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 47AEFC88D6CFD9E0F03542B90C6E55E8
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Z5
ProdName  : Z5
ProdModel : Z5
Device    : Z5
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_lokyee72_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / lokyee72_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 953 MiB
Scatter saved to : E:\andro 1\GUO PHONE\V12\MT6572__Z5__Z5__Z5__5.1__ALPS.KK1.MP7.V1\

All done!