kangsuper

Senin, 30 Mei 2016

Flash Xiaomi HM Note 1W 2013121 Bahasa Indonesia


 pokoknya diback sticker ada tulisan 2013121

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.46
Firmware Xiaomi HM Note 1W 2013121 BI atau Bahasa Indonesia

Bahan :
  1.  Download Firmware Stock Rom BI MIUI 7 HM NOTE 1W 2013121 atau Download DISINI
  2.  Download Firmware Stock Rom BI MIUI 8 atau Download Disini
  3.  Download Firmware Custom BI Pussy Fap HM NOTE 1W 2013121 atau Download Disini
  4.  Download Flash Tool DOWNLOAD DISINI
  5.  Driver bila belum punya instal dulu driver mtknya
  6.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  7.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Install Playstore dkk pake INI

Buat yang selalu berhenti waktu flashing di 1%-7% silahkan menggunakan ROM ke-2 MIUI 8 atau dengan cara dibawah ini :
DOWNLOAD DULU FILENYA DISINI atau Download Disini

1. Flash menggunakan file ke-3 yg custom pussy, UNCEK PRELOADER, SYSTEM, CACHE, USERDATA, seperti gambar dibawah :

2. Copy file tadi ke mmc, Masuk Recovery, volume down + on
3. WAJIB Wipe dulu
4. Pilih install from sdcard
5. Done
note : file custom


Flash Xiaomi HM Note 1W via Flash Tool


Log Read Firmware HM Note 1W
Operation : Read Flash [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384732640405015E53035143
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A48384732640405015E53035143
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 6CCDCF5A83C7DAC1AB11ED018BA8AC19
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.46

[Read Ok] : preloader_lcsh92_wet_jb9.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / lcsh92_wet_jb9 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 922 MiB
Scatter saved to : G:\andro3\xiaomi\2013121\bi\MT6592__Xiaomi__HM_NOTE_1W__lcsh92_wet_jb9__4.4.2__ALPS.KK1.MP1.V2.46\

All done!




Flash Mito A160 SC7731

Model Name  : scx35_sp7731geaplus_UUI_dt
Model Brand : MITO
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : MITO_A160_20150612_T05
Model Ext   : MITO_A160

Bahan :

1. Download Fimware PAC  Flash via Research Download MITO_A82
2. Firmware Mito A82 Flash via Infinity CM2 Download Disini
3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Mito A82 Research Download


Flash Via Infinity CM2
Tentang Mito A160
Log Read Firmware Mito A160
Operation : Read FullFlash [ v1.18 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : scx35_sp7731geaplus_UUI_dt
Model Brand : MITO
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : MITO_A160_20150612_T05
Model Ext   : MITO_A160

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 809 MiB
Saved to : G:\andro3\mito\mito a160 7731\SP7731GEA_scx35_sp7731gea_4.4.2_MITO_A160_20150612_T05_MITO_A160\
Done!

Elapsed: 00:06:00





Flash Hummer H5 KitKat

Brand     : HUMMER H5
ProdName  : HUMMER H5
ProdModel : HUMMER H5
Device    : hongyu72_wet_jb3
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.8
Firmware Hummer H5 KitKat  via Flash tool

Bahan :
  1.  Download Firmware Stock Rom Hummer H5 KitKat
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Hummer H5 KitKat  via Flash tool
Tentang Hummer H5
Log Read Firmware Hummer H5
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D4330344758F7B1DD56910F
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344758F7B1DD56910F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : 1543A5DFEA29DDD3BEC12A1B0EC22260
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : HUMMER H5
ProdName  : HUMMER H5
ProdModel : HUMMER H5
Device    : hongyu72_wet_jb3
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.8

[Read Ok] : preloader_hongyu72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hongyu72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 683 MiB
Scatter saved to : G:\andro3\HUMMER H5\MT6572__HUMMER_H5__HUMMER_H5__hongyu72_wet_jb3__4.4.2__ALPS.JB3.MP.V1.8\

All done!

Done!
Elapsed: 00:03:40





Kamis, 26 Mei 2016

Flash Andromax C3 AD6B1H * Bintang


File yang saya upload ini Khusus untuk Andromax C3 AD6B1H * Bintang, silahkan cek di back sticker. Bagi yang Andromax C3 AD6B1H * Bintang mengalami bootloop atau terserang virus, atau salah rom malah Andromax C3 AD6B1H * Bintang anda menjadi blank putih.

Bahan :
  1. File MMC Update Download Disini atau Disini   
  2. File Backup CWM Download Disini atau Disini
  3. File SDImage Download Disini atau Disini
Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Langkah Kerja :
I. Untuk flash standart yang masih bisa masuk ke recovery
1. Extrax MMC Update.zip, copy ketiga file ke mmc (jangan didalam folder)

2. Pasang mmc ke Hp, masuk recovery, copot pasang batray, tekan volume up + on
3. Pilih apply update from sdcard
4. Pilih file msm8610_s8_ad6b1h-ota-eng.root.zip
5. Tunggu sampai proses selesai 5-8 menit, sampai ada tulisan install from sdcard complete
7. Pilih reboot, tunggu 8-10 menit untuk boot pertama kali
8. done


 II. Untuk yang tidak bisa masuk recovery atau blank putih (salah rom)
*) Pasang CWM
1. Extrax sdimage (jangan sdimage dibawah subfolder sdimage ), copy ke MMC

 2. Pasang mmc ke Hp, hidupkan Andromax C3 anda, proses flashing berlangsung ditandai warna biru, proses sekitar 5menit. Untuk yang Andromax C3 blank putih sama juga, biar gambar gak kelihatan tapi proses juga berlangsung.
3. Proses pasang CWM selesai ditandai warna hijau, yang Andromax C3 blank putih juga sudah keluar gambar lagi.

*) Proses flashing
via flash file update zip
1. Copy  file msm8610_s8_ad6b1h-ota-eng.root.zip ke mmc, pasang mmc ke Andromax C3
2. Matikan Andromax C3, masuk recovery volume up + on
3. Pilih instal zip
4. Pilih file msm8610_s8_ad6b1h-ota-eng.root.zip
5. Tunggu sampai proses selesai 5-8 menit, sampai ada tulisan install from sdcard complete
5. Restart and done.

via restore CWM
1. Copy folder clockworkmod ke mmc, pasang ke Andromax C3
2. Matikan Andromax C3, masuk recovery volume up + on
3. Pilih backup and restore
 4. Install from sdcard0, terus pilih 1970-xxxx, terus pilih yes restore


5. Tunggu sampai complete
6. Restart and Done






Rabu, 25 Mei 2016

Firmware Advan S3A Build Number :

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : ADVAN S3A
Device    : Vandroid
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Firmware Advan S3A sesuai Build Numbernya

1. Advan S3A Build Number : W3512/V2.0/JB4.2.2
    Download Disini atau Disini

2. Advan S3A Build Number :WG3521/Z35W03_V2.0/JB4.2.2
    Download Disini atau Disini


3.  Advan S3A Build Number : WG3512/Z35W03_V2.0/Kitkat4.4
     Download Disini atau Disini



  1.  Download Flash Tool DOWNLOAD DISINI
  2.  Driver bila belum punya instal dulu driver mtknya
  3.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  4.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
  5. 1 password buat ke-3 file
Video Cara Flash Advan S3A

Untuk yang mengalami BROM ERROR : S_DA_NFB_BOOTLOADER_NOT_EXIST (3050)Format via flash tool dalam mode advanced Mode, Tekan CTRL+ALT+V, kemudian flash lagi. Seperti Video dibawah

 Video Format Advan S3A dalam mode advanced Mode, Tekan CTRL+ALT+V
Kalau abis diformat pasti imei invalid, silahkan root dan kemudian write imei, cek di link tutorial.


Log Read Firmware Advan S3a
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 009800BC009000660076001500010000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0096 , [TOSHIBA] TYBC0A111557KC
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0015 0001
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID    : A8F15ED335B8AE4AD30B37DF023990DD
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_vanzo72_wet_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / vanzo72_wet_lca / NAND
FW Size : 239 MiB

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : ADVAN S3A
Device    : Vandroid
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Android Info saved

Scatter saved to : G:\andro3\ADVAN\S3A WG3521 Z35W03 V02 JB422\MT6572_NAND_ADVAN__ADVAN S3A__Vandroid__4.2.2__ALPS.JB3.MP.V1

Done!





Flash Polytron R3450 Stock Rom


Brand     : Polytron
ProdName  : R3450
ProdModel : POLYTRON_R3450
Device    : R3450
AndroidVer: 4.2.2
MTKxCPU   : MT6572

Firmware Polytron R3450 Stock Rom

Bahan :
  1.  Download Firmware Polytron R3450 Disini atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
 Flash Polytron R3450 Flash Tool


About Polytron R3450

Log Read Firmware Polytron R3450
Operation : Check / Read Info [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35575A4D42013242C290B011
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D42013242C290B011
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : C7386D4434A77CEA4DE8B660950A59B2
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Polytron
ProdName  : R3450
ProdModel : POLYTRON_R3450
Device    : R3450
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : 2013-10-23 09:56:58

SECURITY :
IMEI_SW [1] : 3586
IMEI_SW [2] : 3586
BTMAC Addr  : 8CC5E14E5F20
WiFi MAC    : 8CC5E14E5F21

EXTRA :
LCD [0] : otm8018b_dsi_vdo
LCD Res : 854x480
TOUCH [0] : ft5316
CAM [0] : ov5645_mipi_yuv
CAM [1] : sp0a28_mipi_yuv
MODEM : konka72_i120_jb3_900_2100
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR hdpi

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!


Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35575A4D42013242C290B011
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D42013242C290B011
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : C7386D4434A77CEA4DE8B660950A59B2
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Polytron
ProdName  : R3450
ProdModel : POLYTRON_R3450
Device    : R3450
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : 2013-10-23 09:56:58

[Read Ok] : preloader_konka72_i150.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / konka72_i150 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 800 MiB
Scatter saved to : G:\andro3\POLYTRON\R3450\MT6572__Polytron__POLYTRON_R3450__R3450__4.2.2__2013-10-23_095658\

All done!


Selasa, 24 Mei 2016

Flash Mito A82 SC7715

Sorry gak buat ss, keburu diambil.


Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Spreadtrum
Device Model   : scx15_sp7715ea
Device CPU     : scx15_sp7715ea
Device IntName : scx15_sp7715eaplus
Device Version : 4.4.2
Device Compile : 4/15/2015 2:49:22 AM
Device Project : KOT49H test-keys
Device ExtInfo : MITO_A82

Bahan :

1. Download Fimware PAC  Flash via Research Download MITO_A82
2. Firmware Mito A82 Flash via Infinity CM2 Download Disini
3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k, PASS SAMA SEMUA

Error pada research download baca disini

Flash Mito A82 Research Download


Video Flash Mito A82 Via CM2



Log Read Firmware Mito A82 SC7715
Operation : Read FullFlash [ v1.16 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 eMMC loader v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 eMMC loader v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : scx15_sp7715eaplus
Model Brand : Spreadtrum
Model Device: scx15_sp7715ea
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715EA
Project Ver : KOT49H test-keys
Model Ext   : MITO_A82

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7715_modem_sc7715_cp2.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 686 MiB
Saved to : G:\andro3\mito\mito a82 7715\SCX15_SP7715EA_scx15_sp7715ea_4.4.2_KOT49H_test-keys_MITO_A82\
Done!

Elapsed: 00:05:01




Senin, 23 Mei 2016

TF Update Andromax I46D1G


TF Update Andromax I46D1G atau Andromax R, berguna untuk menghilangkan virus atau untuk mengatasi bootloop pada Andromax R.

PASS : kangsuperandromaxr

Bahan :
1. File TF Update Andromax R Download Disini  atau DISINI

2. MMC atau SDcard
3. Batray isi 50%++

Cara Kerja
1. Extract file dan copy ke tiga file ke mmc, jangan ditaruh didalam folder

2. Masukkan mmc ke Andromax R anda
3. Pencet volume up + down trus power on
4. Proses flashing Andromax R berlangsung, jangan sampai copot batray, proses 20menitan.
5. Proses flashing Andromax R selesai
6. Pencet power sampai mati dan reboot
7. Tunggu 5 menit buat loading, Andromax R anda sudah siap dipake kembali
8. Done