kangsuper

Jumat, 30 September 2016

Firmware Mito A80 Lolipop T10

MITO_A80_ANDROID_5.1_T10_20150729

Model Name  : sp7731geahdplusoversea
Model Brand : MITO
Model Device: scx35_sp7731gea_hd
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HD
Project Ver : MITO_A80_ANDROID_5.1_T10_20150729
Model Ext   : MITO_A80

Bahan :
1. Download Firmware PAC MITO_A80_ANDROID_5.1_T10_20150729
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash Mito A80

Log Read Firmware Mito A80
[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geahdplusoversea
Model Brand : MITO
Model Device: scx35_sp7731gea_hd
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HD
Project Ver : MITO_A80_ANDROID_5.1_T10_20150729
Model Ext   : MITO_A80

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1293 MiB
Saved to : F:\andro3\mito\mito a80 t10\SP7731GEA_HD_scx35_sp7731gea_hd_5.1_MITO_A80_ANDROID_5.1_T10_20150729_MITO_A80\
Done!

Elapsed: 00:06:12



Kamis, 29 September 2016

Firmware AXIOO PICOphone M4P M3 GEP


AXIOO PICOphone M4P M3

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP4_20150917
Model Ext   : PICOphone_M4P_M3

CEK SN dibawah imei seperti gambar diatas lingkaran merah, GEP.
Bahan :
1. Download Firmware PAC AXIOO PICOphone M4P M3 GEP
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash  AXIOO PICOphone M4P M3 via Research Download

Log Read Firmware Axioo picophone M4P M3
Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP4_20150917
Model Ext   : PICOphone_M4P_M3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1974 MiB
Saved to : F:\AXIOO\AXIO M4P M3\SP7731GEA_HDR_PICOphone_M4P_M3_5.1_PICOphone_M4P_GEP4_20150917_PICOphone_M4P_M3\
Done!

Elapsed: 00:10:13



Flash Brancode B9


Model Name  : scx15_sp7715ga_c01_b_brandcode_plus
Model Brand : B9
Model Device: scx15_sp7715ga_c01_b_brandcode
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA_C01_B
Project Ver : KOT49H test-keys
Model Ext   : B9

Bahan :
1. Download Firmware PAC Brancode B9
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini


Log read firmware Brancode B9

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!

Model Name  : scx15_sp7715ga_c01_b_brandcode_plus
Model Brand : B9
Model Device: scx15_sp7715ga_c01_b_brandcode
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA_C01_B
Project Ver : KOT49H test-keys
Model Ext   : B9

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7715_modem_sc7715_cp2.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : seclogo.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 328 MiB
Saved to : G:\andro3\brandcode\b9\SCX15_SP7715GA_C01_B_[NAND_b256k]_scx15_sp7715ga_c01_b_brandcode_4.4.2_KOT49H_test-keys_B9\
Done!

Elapsed: 00:10:26




Rabu, 28 September 2016

Flash City Call CT-88 SC7731 & SC7731C


 City Call CT-88
Model Name  : KS4506C_CityCall
Model Brand : CityCall
Model Device: KS4506C_CityCall
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FWVGA
Project Ver : SW04_CT_88_2015_06_05
Model Ext   : CT-88

Bahan :
1.  SC7731
 

2. SC7731C
Download Firmware PAC City Call CT-88 SW04 SC7731C atau download disini



3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash City Call CT-88 via Research Download


[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : KS4506C_CityCall
Model Brand : CityCall
Model Device: KS4506C_CityCall
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FWVGA
Project Ver : SW04_CT_88_2015_06_05
Model Ext   : CT-88

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W14.48_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1177 MiB
Saved to : F:\andro3\CITY CALL\CT-88\SP7731GEA_FWVGA_KS4506C_CityCall_4.4.2_SW04_CT_88_2015_06_05_CT-88\
Done!

Elapsed: 00:05:54



Sabtu, 24 September 2016

Flash Axioo PICOphone L1 GEF Kitkat & Lolipop


Model Name  : PICOphone_L1
Model Brand : Axioo
Model Device: PICOphone_L1
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FS032
Project Ver : PICOphone_L1_GEF_SW20150508_R280515
Model Ext   : PICOphone_L1

Bahan :
1. Download Firmware PAC Axioo PICOphone L1 GEF
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

CATATAN PENTING
Cek GEF atau bukan dibawah IMEI
Axioo L1, berdasar dari pengalaman kami
1. Yang sudah upgrade ke versi LOLI jangan pake file KK hasil bisa man getar
2. Bagi versi KK flash ke KK atau flash ke Loli buat L1 GEF
3. Bagi yg sudah diflash ke versi LOLI GEF3 dan hasil baseband unknown, silahkan flash pake LOLI GEF

                                 

Error pada research download baca disini

Cara Flash Axioo PICOphone L1 GEF  via Research Download


Log Read Firmware  Axioo PICOphone L1
[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PICOphone_L1
Model Brand : Axioo
Model Device: PICOphone_L1
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FS032
Project Ver : PICOphone_L1_GEF_SW20150508_R280515
Model Ext   : PICOphone_L1

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1283 MiB
Saved to : F:\AXIOO\AXIOO L1\GEF\SP7731GEA_FS032_PICOphone_L1_4.4.2_PICOphone_L1_GEF_SW20150508_R280515_PICOphone_L1\
Done!

Elapsed: 00:06:42



Flash Polytron R2457

 Polytron R2457 Rocket S2

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2457_V13_20160503
Model Ext   : POLYTRON-R2457

Bahan :
1. Download Firmware PAC POLYTRON_R2457_V13_20160503 atau Download Disini
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash Polytron R2457  via Research Download



Log Read Firmware Polytron R2457
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2457_V13_20160503
Model Ext   : POLYTRON-R2457

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1987 MiB
Saved to : F:\andro3\POLYTRON\r2457\SP7731GEA_HDR_device_5.1_POLYTRON_R2457_V13_20160503_POLYTRON-R2457\
Done!



Cara Flash Mito A550

 MITO 550 16010 T06
Model Name  : MITO A550
Model Brand : MITO
Model Device: MITO_A550
AndrVersion : 5.1
BaseBand CPU: MITO
Project Ver : MITO_A550_160106_T06
Model Ext   : MITO_A550

Bahan :
1. Download Firmware PAC MITO A550_160106_T06
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Tutorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash MITO A550  via Research Download



Log Read Firmware Mito A550
[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : MITO_A550
Model Brand : MITO
Model Device: MITO_A550
AndrVersion : 5.1
BaseBand CPU: MITO
Project Ver : MITO_A550_160106_T06
Model Ext   : MITO_A550

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1813 MiB
Saved to : F:\andro3\mito\a550 t6\MITO_MITO_A550_5.1_MITO_A550_160106_T06_MITO_A550\
Done!


Sabtu, 17 September 2016

Flash SPC Phantom S3 SC7715


Model Name  : n9_sc7715ga_0402
Model Brand : Spreadtrum
Model Device: n9_sc7715ga_0402
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : T6_0402_150617
Model Ext   : S3

Bahan :
1. Download Firmware PAC SPC Phantom S3 SC7715 T6

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash SPC Phantom S3 via Research Download


Log Read Firmware SPC Panthom S3
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!

Model Name  : n9_sc7715ga_0402
Model Brand : Spreadtrum
Model Device: n9_sc7715ga_0402
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : T6_0402_150617
Model Ext   : S3
spc panthom
 

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : fblogo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 294 MiB
Saved to : F:\andro3\spc\s3 phantom\SCX15_SP7715GA_[NAND_b256k]_n9_sc7715ga_0402_4.4.2_T6_0402_150617_S3\
Done!



Flash Xiaomi Redmi 3 2015811 BI / Bahasa Indonesia


Flash Xiaomi Redmi 3 2015811 BI / Bahasa Indonesia via USB OTG

Disini saya akan membahas flashing Xiaomi Redmi 3 2015811 via USB OTG, karena via USB OTG Redmi 3 harus dalam posisi hidup, terkunci micloud atau bootloop, kalau posisi matot tidak bisa. Redmi 3 anda juga sudah terunlock bootloadernya.

Via USB OTG Bahan :
1. USB OTG
2. Flash Disk atau MMC+cardreader 4GB+
3. Oneclick buat flash Recovery TWRP Download Disini ( tanpa pass)
4. Firmware Flash Xiaomi Redmi 3 2015811 via TWRP Download Disini (berpassword)
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Buat redmi 3 2015811 micloud / bi /4g via miflash (tanpa unlock bootloader): 
  1. Rom Flash via MIFLASH download disini atau disini
  2. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
*Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx


Cara Kerja

extrax file yang didonload tadi
I. INSTALL TWRP
1. Masukkan Redmi 3 anda ke fastboot mode, colokkan ke pc, install driver Volume down + on
2. Buka folder oneclik TWRP REDMI 3, klik TWRP REDMI 3.bat
3. Redmi 3 anda akan otomatis restart dan TWRP akan terinstall

II. BACKUP via TWRP

1. Silahkan colokkan USB OTG anda,  Masuk recovery mode, Volume up + on, tunggu bentar, baru pilih recovery
2. Redmi 3 anda masuk ke TWRP

3. Pastikan anda melakukan backup dulu, pilih menu backup, pilih Select Storage USB OTG
4. Centang semua, kemudian backup

III. RESTORE via TWRP

1. Copot MMC atau flashdisk anda, copy folder (2016-09-17--01-42-51_LMY47V) yg anda download tadi kedalam folder MMC yang anda backup tadi, Copykan ke dalam folder x:\TWRP\BACKUPS\xxxxxx

sehingga akan terlihat ada 2 folder, folder backup anda dan yg anda download

2. Masukkan ke USB OTG, dan masuk lagi ke Recovery mode volume + on

3. Pilih Restore, pilih Select Storage USB OTG,  Pilih folder (2016-09-17--01-42-51_LMY47V)
4. Centang semua kecuali efs

5. Proses Restore
6. Proses Restore selesai, reboot, DONE



Silahkan coba dulu untuk Flash recovery TWRP (file tanpa pass), bila sudah bisa, anda bisa meneruskan untuk Flash via TWRP (bermahar).
Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


FRP E2 B16C2H V7.5

FRP E2 B16C2H V7.5

Cara Kerja :
1. Hidupkan E2 B16C2H, konekkan ke wifi atau sim data aktif
2. Masuk ke page verifikasi google
3. Pencet pada keyboard tanda koma (,), sampe keluar setting, pencet seting

4. Pilih preferensi kemudian pencet softscreen pojok kiri

5. Anda akan langsung masuk menu home screen seperti gambar dibawah, pencet search di layar atas
6. Ketikkan pengaturan maka akan tampil diatas keyboard tap pengaturan, klik tap pengaturan
7. Masuk menu pengaturan, reset

8. Tunggu restart, DONE