kangsuper

Kamis, 12 April 2018

Flash & Firmware Coolpad X7-IOO / F101 Scatter File

Brand     : Coolpad
ProdName  : X7-I00
ProdModel : Coolpad F101
Device    : X7-I00
AndroidVer: 4.4.2
MTKxCPU   : MT6595
MTKxPRJ   : ALPS.KK1.MP11.V1.36
 
Bahan :

  1. Download  Firmware FULL Coolpad X7-IOO / F101 scatter atau Download Disini
  2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

-) Cara Flash Coolpad X7-IOO / F101 via Flash Tool


Log Read Firmware Coolpad X7-IOO / F101
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6595
BB_CPU_NME : [MediaTek] MT6595_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x8C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147326505075D90516A426B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505075D90516A426B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBDF47A7793935D391DE9DA520B
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Coolpad
ProdName  : X7-I00
ProdModel : Coolpad F101
Device    : X7-I00
AndroidVer: 4.4.2
MTKxCPU   : MT6595
MTKxPRJ   : ALPS.KK1.MP11.V1.36

[Read Ok] : preloader_cpx7_i00se.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6595 / V1.1.2 / cpx7_i00se / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2004 MiB
Scatter saved to : D:\New folder\MT6595__Coolpad__Coolpad_F101__X7-I00__4.4.2__ALPS.KK1.MP11.V1.36\

All done!



Flash Sunberry S7 MT6572 Nand

Device Brand   : S7
Device Model   : S7
Device CPU     : MT6572
Device IntName : S7
Device Version : 4.4.2
Device Compile : 3/29/2017 6:35:06 AM
Device Project : Q3_HS_GT013_S7_V0.7_M44_B18_20170329
Device ExtInfo : S7
Note : Cek fisik, samakan dengan photo yang kami upload

Bahan :

  1. Download  Firmware FULL Sunberry S7 atau Download Disini
  2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

-) Cara Flash Sunberry S7 via Flash Tool



Log Read Firmware Sunberry S7
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xFCC4CFBD7459CAB2A42CEEEF5EC45E1B
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...
[Read Ok] : preloader_q3_m144_b18_gt019_s7world.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / q3_m144_b18_gt019_s7world / NAND
FW Size : 296 MiB

Brand     : S7
ProdName  : S7
ProdModel : S7
Device    : S7
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : Q3_HS_GT013_S7_V0.7_M44_B18_20170329
Android Info saved
Scatter saved to : D:\sunberry\s7\MT6572_NAND_S7__S7__S7__4.4.2__Q3_HS_GT013_S7_V0.7_M44_B18_20170329

Done!



Rabu, 11 April 2018

Flash & Bypass FRP Himax H51i

Brand     : HIMAX
ProdName  : H51i
ProdModel : H51i
Device    : H51i
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : KAAL570S_IDF_ID_EN_0.05.414

Bahan :

  1. Download  Firmware FULL Himax H51i FRP ONLY atau Download Disini
  2. Download  Firmware FULL Himax H51i + FRP atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Himax H51i, hanya centang pada tab FRP, silahkan lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

-) Cara Bypass FRP Only Himax H51i via Flash Tool
 -)  Cara Flash & Bypass FRP Himax H51i via Flash Tool


Log Read Info Himax H51i
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D42314563DC0742630926C4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1E
[eMMC] : FLASH_CID : 150100524531424D4207DC63C4262363
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBD402528C25A59C39294D73F7B
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : HIMAX
ProdName  : H51i
ProdModel : H51i
Device    : H51i
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : KAAL570S_IDF_ID_EN_0.05.414

SECURITY :
IMEI_SW [1] : 357033063278592
IMEI_SW [2] : 357033063278600
BTMAC Addr  : 8CC5E1182810
WiFi MAC    : 8CC5E1182811

MODEM :
BaseBand  : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V48_P8_1_lwg_n

EXTRA :
LCD [0] : hx8394f_hd720_dsi_vdo
LCD [1] : ili9881c_hd720_dsi_vdo
LCD Res : 1280x720
TOUCH [0] : nt11205
TOUCH [1] : focaltech
CAM [0] : s5k3l8_mipi_raw
CAM [1] : s5k3m2_mipi_raw
CAM [2] : ov5670_mipi_raw
MODEM : konka6735_65u_3g_b1b8_4g_b1b3b8
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!



Sabtu, 24 Maret 2018

Flash & Firmware HM M3

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3

Bahan :

  1.  Download Firmware PAC HM M3 V1.4 atau  Download Disini
  2.  Download Firmware PAC HM M3 V2.1 atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Note :
1. Boot volume +/-

Cara Flash HM M3 via Research Download

Log Read Firmware HM M3
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : logo10.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1707 MiB
Saved to : E:\hm\m3\New folder\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M3\
Done!



Flash & Firmware Nexcom Mega

Model Name  : s7190a
Model Brand : NEXCOM
Model Device: scx35_sp5735c2ea
AndrVersion : 4.4.2
BaseBand CPU: SP5735C2EA
Project Ver : NC_Mega_20160920
Model Ext   : Mega

Bahan :

  1.  Download Firmware PAC Nexom Mega atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Note :
1. Boot volume (-)

Cara Flash Nexcom Mega via Research Download

Log Read Firmware Nexcom Mega
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : s7190a
Model Brand : NEXCOM
Model Device: scx35_sp5735c2ea
AndrVersion : 4.4.2
BaseBand CPU: SP5735C2EA
Project Ver : NC_Mega_20160920
Model Ext   : Mega

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_800x1280.bin
[Read Ok] : fblogo_800x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1044 MiB
Saved to : F:\Nexcom Mega\SP5735C2EA_scx35_sp5735c2ea_4.4.2_NC_Mega_20160920_Mega\
Done!





Sabtu, 03 Maret 2018

Flash & Bypass FRP Lenovo TB3-701i via Flash tool

FRP Lenovo TB3-701i  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
Brand     : Lenovo
ProdName  : LenovoTB3-710I
ProdModel : Lenovo TB3-710I
Device    : TB3-710I
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : TB3-710I_USR_S000029_1603181200_MP6V2_ROW

Bahan :
  1.  Download  Firmware Lenovo TB3-701i FRP ONLY  atau Download Disini (73KB)
  2. Download  Firmware FULL Lenovo TB3-701i  + FRP atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Lenovo TB3-710I, hanya centang pada tab FRP, silahkan lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

 Cara Flash Lenovo TB3-710I via Flash Tool

Log Read Firmware Lenovo TB3-701i
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505072E97DC435357
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505072E97DC435357
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD1B61CD7931318226E76865E8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Lenovo
ProdName  : LenovoTB3-710I
ProdModel : Lenovo TB3-710I
Device    : TB3-710I
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : TB3-710I_USR_S000029_1603181200_MP6V2_ROW

[Read Ok] : preloader_hq8321_tb_b2b_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hq8321_tb_b2b_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2008 MiB
Scatter saved to : D:\ANDROID\lenovo 2\lenovo\TB3-710i\New folder\MT6580__Lenovo__Lenovo_TB3-710I__TB3-710I__5.1__TB3-710I_USR_S000029_1603181200_MP6V2_ROW
\


Flash & Bypass Mito A39 via Flash Tool


FRP Mito A39  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : MITO A39
ProdName  : MITO A39
ProdModel : MITO A39
Device    : MITO_A39
AndroidVer: 6.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-m0.mp1-V2.84_droi6737t.35g.m0_P78

Bahan :
1. Mito A39 T10
 Download  Firmware Mito A39  T10 FRP ONLY   atau Download Disini (73KB)
 Download  Firmware FULL Mito A39 T10  + FRP   atau Download Disini

2. Mito A39 T15
 Download  Firmware Mito A39 T15 FRP ONLY   atau Download Disini (73KB)
 Download  Firmware FULL Mito A39 T15  + FRP   atau Download Disini

3. Mito A39  V006_RAM3GB
  Download  Firmware Mito A39 RAM3GB FRP ONLY   atau Download Disini (73KB)
 Download  Firmware FULL Mito A39 RAM3GB  + FRP   atau Download Disini

4. Download SP-Flash-Tool Wajib pake versi ini Download Disini
5. Driver bila belum punya instal dulu driver mtknya
6.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
7.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Mito A39, hanya centang pada tab FRP, silahkan lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

 Cara Flash Bypass FRP Mito A39 via Flash Tool

Log Read Firmware Mito A39
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 3800011533445057A7CE00528F37DE48
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3DPW
[eMMC] : FLASH_CID : 15010038575044335200CEA748DE538F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDB65CDF142A4065AA2C0B19C1
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : MITO A39
ProdName  : MITO A39
ProdModel : MITO A39
Device    : MITO_A39
AndroidVer: 6.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-m0.mp1-V2.84_droi6737t.35g.m0_P78

[Read Ok] : preloader_f5c81w_whx_postel.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / f5c81w_whx_postel / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2237 MiB
Scatter saved to : E:\mito\mito a39\MT6737M__MITO_A39__MITO_A39__MITO_A39__6.0__alps-mp-m0.mp1-V2.84_droi6737t.35g.m0_P78\